Accurately determine your crochet gauge based on hook size and yarn weight to ensure your projects turn out as intended. Perfect for knitters and crocheters!
Gauge Calculation
Enter the diameter of your crochet hook in millimeters.
Select Yarn Weight
Lace (0)
Super Fine (1)
Fine (2)
Light (3)
Medium (4)
Bulky (5)
Super Bulky (6)
Jumbo (7)
Choose the standard yarn weight category (e.g., worsted, bulky).
Count the number of stitches within a 4-inch (10 cm) wide section of your swatch.
Count the number of rows within a 4-inch (10 cm) high section of your swatch.
Your Estimated Crochet Gauge
—
Stitches per Inch: —
Rows per Inch: —
Yarn Weight Factor: —
Calculated as: (Stitches in 4 inches / 4) for Stitches Per Inch, and (Rows in 4 inches / 4) for Rows per Inch. Hook size and yarn weight influence these values.
Gauge Influence: Hook Size vs. Stitches Per Inch
Typical Gauge Ranges by Yarn Weight Category
Yarn Weight Category
Typical Stitches per 4 inches
Typical Rows per 4 inches
Recommended Hook Size (mm)
Lace (0)
33-40 sts
44-54 rows
1.0-1.5
Super Fine (1)
27-32 sts
32-42 rows
1.5-2.75
Fine (2)
23-26 sts
30-34 rows
2.75-3.5
Light (3)
17-22 sts
20-28 rows
3.5-4.5
Medium (4)
13-16 sts
17-23 rows
4.5-5.5
Bulky (5)
8-11 sts
11-14 rows
5.5-8.0
Super Bulky (6)
6-7 sts
8-10 rows
8.0-12.0
Jumbo (7)
3-5 sts
4-6 rows
12.0+
What is Crochet Gauge?
Crochet gauge refers to the number of stitches and rows that fit into a specific measurement, typically 4 inches (10 cm) square. It's a fundamental concept in crochet that dictates the final size and drape of your finished project. Achieving the correct gauge is crucial for ensuring your knitted or crocheted item matches the dimensions specified in a pattern. A mismatch in gauge can lead to a garment that's too small, too large, or has an unintended fabric texture. Think of it as the blueprint for your yarn's density and your stitch work's precision.
Who should use a crochet gauge calculator? Any crocheter, from beginner to advanced, who is working from a pattern should be concerned with gauge. This is especially true for garments like sweaters, hats, gloves, and socks, where precise sizing is essential. If you're designing your own patterns, understanding gauge is paramount for scaling your designs correctly. Even experienced crafters can benefit from using a calculator to quickly verify their gauge or to understand how different yarn weights and hook sizes might affect their results.
Common misconceptions about crochet gauge: One common misconception is that gauge is solely determined by the pattern designer's tension. While individual tension plays a role, the combination of yarn weight and hook size are equally, if not more, significant factors. Another misconception is that gauge doesn't matter for small projects like amigurumi or dishcloths. While a few stitches off might not ruin a small item, understanding gauge helps in controlling the fabric's density, which impacts its stretch, durability, and appearance.
Crochet Gauge Formula and Mathematical Explanation
The core of understanding crochet gauge lies in calculating how many stitches and rows fit into a standard measurement, usually 4 inches. The complexity arises because yarn thickness, hook size, and your personal tension all interact. Our calculator simplifies this by allowing you to input your swatch results and derive key metrics.
Calculating Stitches and Rows Per Inch
The primary calculation involves converting the stitch and row counts observed in a 4-inch square into counts per 1 inch. This provides a standardized measure regardless of the swatch size you create.
Formula for Stitches Per Inch:
Stitches Per Inch = Stitches in 4 inches / 4
Formula for Rows Per Inch:
Rows Per Inch = Rows in 4 inches / 4
While these are the direct calculations for per-inch measurements, the calculator also uses the selected yarn weight category to provide context. The 'Yarn Weight Factor' is an approximation derived from typical yarn weights and their associated crochet hook sizes. It's not a direct mathematical formula but rather a categorical value reflecting industry standards.
Variable Explanations:
Variable
Meaning
Unit
Typical Range
Hook Size
Diameter of the crochet hook used.
mm
1.0 – 12.0+
Yarn Weight Category
Standardized classification of yarn thickness.
Category Number (0-7)
0 (Lace) – 7 (Jumbo)
Stitches in 4 inches
Number of stitches counted in a 4-inch width of a gauge swatch.
Stitches
3 – 40+
Rows in 4 inches
Number of rows counted in a 4-inch height of a gauge swatch.
Rows
4 – 54+
Stitches Per Inch
Calculated stitches within a 1-inch width.
Stitches/inch
0.75 – 10+
Rows Per Inch
Calculated rows within a 1-inch height.
Rows/inch
1 – 13.5+
Yarn Weight Factor
A numerical value associated with the yarn weight category, used for general comparison.
Unitless (Category based)
0.8 – 7.0
Practical Examples (Real-World Use Cases)
Example 1: Achieving Pattern Gauge for a Sweater
Sarah is knitting a sweater pattern that calls for a gauge of 16 stitches and 20 rows per 4 inches using a Medium (Worsted) weight yarn. She selects her favorite worsted weight yarn and a 5.0 mm hook. After crocheting a small swatch, she measures it and finds she has 18 stitches and 24 rows within a 4-inch square.
Inputs:
Hook Size: 5.0 mm
Yarn Weight Category: Medium (4) – corresponds to factor 3.5
Stitches in 4 inches: 18
Rows in 4 inches: 24
Calculator Results:
Stitches per Inch: 4.5
Rows per Inch: 6.0
Yarn Weight Factor: 3.5
Main Result (Stitches/4″): 18
Main Result (Rows/4″): 24
Interpretation: Sarah's gauge is tighter than the pattern requires (18 sts vs 16 sts). This means her finished sweater will likely be smaller than the pattern suggests. To achieve the correct gauge, she needs to use a larger hook size to create looser stitches. She should try again with a 5.5 mm or even a 6.0 mm hook.
Example 2: Working with Bulky Yarn for a Blanket
John is making a chunky blanket using a bulky weight yarn. The pattern doesn't specify exact gauge but suggests a large, soft fabric. He uses a 7.0 mm hook and his bulky yarn. His swatch measures 10 stitches and 12 rows within a 4-inch square.
Inputs:
Hook Size: 7.0 mm
Yarn Weight Category: Bulky (5) – corresponds to factor 4.5
Stitches in 4 inches: 10
Rows in 4 inches: 12
Calculator Results:
Stitches per Inch: 2.5
Rows per Inch: 3.0
Yarn Weight Factor: 4.5
Main Result (Stitches/4″): 10
Main Result (Rows/4″): 12
Interpretation: John's gauge is 10 stitches and 12 rows per 4 inches. This aligns perfectly with the typical gauge ranges for bulky yarns (often 8-11 sts per 4″). The fabric will be soft and drapey as desired for a blanket. He can proceed with the pattern, confident that his blanket will be close to the intended size and texture.
How to Use This Crochet Gauge Calculator
Our Crochet Gauge Calculator is designed for simplicity and accuracy, helping you achieve the perfect fabric for your projects. Follow these steps:
Create a Gauge Swatch: Using the yarn and hook size you intend to use for your project, crochet a piece of fabric larger than 4×4 inches (10×10 cm). Make sure to use the same stitch pattern specified in your pattern, or a standard stitch like single crochet or double crochet if designing your own work. Work a few extra stitches and rows than required to avoid edge distortion.
Block Your Swatch (Optional but Recommended): If your pattern or yarn suggests blocking, do so before measuring. Blocking can significantly affect the final dimensions of your fabric.
Measure Accurately: Lay your swatch flat on a firm surface. Use a ruler or measuring tape to find the center of the swatch. Count the number of stitches within a 4-inch (10 cm) width. Then, count the number of rows within a 4-inch (10 cm) height. Try to measure in the middle of the swatch, away from the edges, for the most accurate reading.
Enter Your Measurements:
Input the diameter of your crochet hook in millimeters into the 'Hook Size (mm)' field.
Select your yarn's weight category from the dropdown menu.
Enter the number of stitches you counted within 4 inches into the 'Stitches in 4 inches' field.
Enter the number of rows you counted within 4 inches into the 'Rows in 4 inches' field.
Calculate: Click the "Calculate Gauge" button.
Read the Results:
Main Result: This will show your calculated stitches and rows per 4 inches, matching your swatch measurements.
Stitches Per Inch: This tells you how many stitches fit into a single inch.
Rows Per Inch: This indicates how many rows fit into a single inch.
Yarn Weight Factor: A reference number for your selected yarn weight.
Decision-Making Guidance:
If your calculated gauge matches the pattern's required gauge: Congratulations! You can proceed with your project using the specified yarn and hook size.
If you have too many stitches per inch (gauge is too tight): You need to make your stitches larger and looser. Use a larger crochet hook.
If you have too few stitches per inch (gauge is too loose): You need to make your stitches smaller and tighter. Use a smaller crochet hook.
Adjust Rows: Row gauge is often more forgiving but can also be adjusted by hook size. A larger hook generally results in fewer rows per inch, and a smaller hook results in more rows per inch.
Remember to always re-check your gauge if you change hook size, yarn weight, or stitch pattern.
Key Factors That Affect Crochet Gauge Results
While our calculator provides a precise measurement based on your swatch, several external factors can influence your actual gauge and the calculator's estimations. Understanding these elements helps in achieving accurate results and troubleshooting discrepancies.
Hook Size: This is arguably the most significant factor. A larger diameter hook creates larger stitches, resulting in fewer stitches and rows per inch (looser gauge). Conversely, a smaller hook creates smaller stitches, leading to more stitches and rows per inch (tighter gauge).
Yarn Weight & Fiber Content: Different yarn weights inherently have different thicknesses. Heavier yarns (bulky, jumbo) naturally produce fewer stitches per inch than lighter yarns (lace, fingering). The fiber content also plays a role; wool may bloom and grow after washing, affecting gauge, while cotton might behave differently. Some fibers are more elastic than others, impacting the fabric's drape and stretch.
Personal Tension: Each crocheter has a unique tension. Some naturally crochet tightly, while others crochet loosely. This is a fundamental variable that even consistent use of the same hook and yarn can't eliminate. Practice and becoming aware of your own tension are key.
Stitch Pattern: The type of stitch used dramatically affects gauge. Cabled stitches or textured patterns take up more space and can create a different gauge than simple single crochet or double crochet stitches. Always check gauge using the stitch pattern specified in your pattern.
Crocheting Technique: Subtle differences in how you hold the yarn, wrap it around your hook, or how tightly you pull each stitch can influence your tension and, consequently, your gauge. Some people pull their yarn from the center of the skein, while others pull from the outside, which can sometimes affect yarn tension.
Gauge Swatch Size and Tension Consistency: A swatch that is too small (less than 4×4 inches) may not accurately represent your true gauge due to edge effects. Ensuring consistent tension throughout the swatch is vital. Try to crochet a swatch slightly larger than 4×4 inches and measure the center section.
Humidity and Temperature: While less common, extreme environmental conditions can subtly affect yarn behavior and your hands' dexterity, potentially leading to minor gauge variations.
Post-Washing/Blocking: Many yarns change significantly after washing and blocking. A swatch that measures correctly before washing might change dimensions afterward. It's often best to check gauge after your swatch has been washed and blocked as your finished item will be.
Frequently Asked Questions (FAQ)
What is the most important part of crochet gauge?
The most important part is ensuring your gauge matches the pattern's requirements, especially for garments. This guarantees the finished item will be the correct size and have the intended drape.
Do I need to make a gauge swatch for every project?
It's highly recommended, especially for patterns where size is critical (garments, fitted accessories). For small, non-sized items like simple coasters or quick scarves where exact dimensions aren't paramount, you might skip it, but be aware the fabric density might differ.
My gauge swatch is too small. What should I do?
If your swatch has too many stitches and rows per 4 inches, your gauge is too tight. You need to loosen up your stitches. The most common solution is to use a larger crochet hook size (e.g., go up by 0.5mm or 1mm).
My gauge swatch is too big. What should I do?
If your swatch has too few stitches and rows per 4 inches, your gauge is too loose. You need to tighten up your stitches. The most common solution is to use a smaller crochet hook size (e.g., go down by 0.5mm or 1mm).
Does the yarn fiber affect gauge?
Yes, absolutely. Different fibers have different properties. Wool often blooms (expands) after washing, cotton can be stiff, and silk might have a different drape. Always check gauge with the specific yarn you intend to use.
What if my stitch gauge matches but my row gauge doesn't?
This can happen. It often means your stitches are the right width but your rows are too short or too tall. Sometimes changing hook size slightly can adjust row gauge too, but if stitch gauge is correct, you might need to adjust the pattern length or width measurements accordingly.
Should I wash and block my gauge swatch?
Yes, if you plan to wash and block your final project, you should do the same to your gauge swatch. This is because washing and blocking can significantly alter the size and drape of the fabric, potentially changing your gauge.
Can yarn winding method affect gauge?
Yes. Pulling yarn from the center of a ball vs. the outside can sometimes result in different yarn tension being fed through your stitches, which may subtly affect your gauge. While less common, it's worth noting if you're struggling to match gauge.
Learn how to interpret pattern instructions, including gauge requirements, to successfully complete your projects.
var chart = null; // Global variable for chart instance
function getElement(id) {
return document.getElementById(id);
}
function calculateGauge() {
var hookSizeInput = getElement("hookSize");
var yarnWeightSelect = getElement("yarnWeight");
var stitchesInGaugeInput = getElement("stitchesInGauge");
var rowsInGaugeInput = getElement("rowsInGauge");
var hookSizeError = getElement("hookSizeError");
var yarnWeightError = getElement("yarnWeightError");
var stitchesError = getElement("stitchesError");
var rowsError = getElement("rowsError");
var mainResultDiv = getElement("main-result");
var stitchesPerInchDiv = getElement("stitchesPerInch");
var rowsPerInchDiv = getElement("rowsPerInch");
var yarnWeightFactorDiv = getElement("yarnWeightFactor");
// Clear previous errors
hookSizeError.style.display = 'none';
yarnWeightError.style.display = 'none';
stitchesError.style.display = 'none';
rowsError.style.display = 'none';
hookSizeInput.classList.remove('error-border');
yarnWeightSelect.classList.remove('error-border');
stitchesInGaugeInput.classList.remove('error-border');
rowsInGaugeInput.classList.remove('error-border');
// Get values
var hookSize = parseFloat(hookSizeInput.value);
var yarnWeight = parseFloat(yarnWeightSelect.value);
var stitchesInGauge = parseFloat(stitchesInGaugeInput.value);
var rowsInGauge = parseFloat(rowsInGaugeInput.value);
var isValid = true;
// Validation
if (isNaN(hookSize) || hookSize <= 0) {
hookSizeError.textContent = "Please enter a valid hook size (e.g., 5.0).";
hookSizeError.style.display = 'block';
hookSizeInput.classList.add('error-border');
isValid = false;
}
if (yarnWeight === 0) {
yarnWeightError.textContent = "Please select a yarn weight category.";
yarnWeightError.style.display = 'block';
yarnWeightSelect.classList.add('error-border');
isValid = false;
}
if (isNaN(stitchesInGauge) || stitchesInGauge <= 0) {
stitchesError.textContent = "Please enter a valid number of stitches (e.g., 16).";
stitchesError.style.display = 'block';
stitchesInGaugeInput.classList.add('error-border');
isValid = false;
}
if (isNaN(rowsInGauge) || rowsInGauge <= 0) {
rowsError.textContent = "Please enter a valid number of rows (e.g., 20).";
rowsError.style.display = 'block';
rowsInGaugeInput.classList.add('error-border');
isValid = false;
}
if (!isValid) {
mainResultDiv.textContent = "–";
stitchesPerInchDiv.textContent = "–";
rowsPerInchDiv.textContent = "–";
yarnWeightFactorDiv.textContent = "–";
return;
}
// Calculations
var stitchesPerInch = (stitchesInGauge / 4).toFixed(2);
var rowsPerInch = (rowsInGauge / 4).toFixed(2);
// Update results display
mainResultDiv.textContent = stitchesInGauge + " sts / " + rowsInGauge + " rows per 4\"";
stitchesPerInchDiv.textContent = stitchesPerInch;
rowsPerInchDiv.textContent = rowsPerInch;
yarnWeightFactorDiv.textContent = yarnWeight;
// Update chart data
updateChart(hookSize, stitchesPerInch, yarnWeight);
}
function resetCalculator() {
getElement("hookSize").value = "";
getElement("yarnWeight").value = "0";
getElement("stitchesInGauge").value = "";
getElement("rowsInGauge").value = "";
getElement("hookSizeError").style.display = 'none';
getElement("yarnWeightError").style.display = 'none';
getElement("stitchesError").style.display = 'none';
getElement("rowsError").style.display = 'none';
getElement("hookSize").classList.remove('error-border');
getElement("yarnWeight").classList.remove('error-border');
getElement("stitchesInGauge").classList.remove('error-border');
getElement("rowsInGauge").classList.remove('error-border');
getElement("main-result").textContent = "–";
getElement("stitchesPerInch").textContent = "–";
getElement("rowsPerInch").textContent = "–";
getElement("yarnWeightFactor").textContent = "–";
if (chart) {
chart.destroy(); // Destroy previous chart instance
chart = null;
initChart(); // Re-initialize an empty chart
}
}
function copyResults() {
var mainResult = getElement("main-result").textContent;
var stitchesPerInch = getElement("stitchesPerInch").textContent;
var rowsPerInch = getElement("rowsPerInch").textContent;
var yarnWeightFactor = getElement("yarnWeightFactor").textContent;
var hookSize = getElement("hookSize").value;
var yarnWeightText = getElement("yarnWeight").options[getElement("yarnWeight").selectedIndex].text;
if (mainResult === "–") return; // Don't copy if no results
var resultString = "— Crochet Gauge Results —\n\n";
resultString += "Hook Size Used: " + hookSize + " mm\n";
resultString += "Yarn Weight: " + yarnWeightText + " (Factor: " + yarnWeightFactor + ")\n";
resultString += "\n";
resultString += "Stitches per 4 inches: " + mainResult.split(' ')[0] + "\n";
resultString += "Rows per 4 inches: " + mainResult.split(' ')[2] + "\n";
resultString += "Stitches per Inch: " + stitchesPerInch + "\n";
resultString += "Rows per Inch: " + rowsPerInch + "\n";
resultString += "\n— Key Assumptions —\n";
resultString += "Gauge swatch measured in a 4-inch square.\n";
resultString += "Calculations based on provided inputs.";
// Use a temporary textarea to copy to clipboard
var textArea = document.createElement("textarea");
textArea.value = resultString;
textArea.style.position = "fixed"; // Avoid scrolling to bottom of page in MS Edge.
textArea.style.top = 0;
textArea.style.left = 0;
document.body.appendChild(textArea);
textArea.focus();
textArea.select();
try {
var successful = document.execCommand('copy');
var msg = successful ? 'Results copied!' : 'Copying text command was unsuccessful';
// Optional: Display a temporary confirmation message to the user
var tempMessage = document.createElement('div');
tempMessage.textContent = msg;
tempMessage.style.cssText = 'position: fixed; top: 50%; left: 50%; transform: translate(-50%, -50%); background: var(–success-color); color: white; padding: 15px; border-radius: 5px; z-index: 1000; font-size: 1.2em;';
document.body.appendChild(tempMessage);
setTimeout(function(){ document.body.removeChild(tempMessage); }, 2000);
} catch (err) {
console.error('Fallback: Oops, unable to copy', err);
// Optional: Display error message
var tempMessage = document.createElement('div');
tempMessage.textContent = 'Copying failed!';
tempMessage.style.cssText = 'position: fixed; top: 50%; left: 50%; transform: translate(-50%, -50%); background: #dc3545; color: white; padding: 15px; border-radius: 5px; z-index: 1000; font-size: 1.2em;';
document.body.appendChild(tempMessage);
setTimeout(function(){ document.body.removeChild(tempMessage); }, 2000);
}
document.body.removeChild(textArea);
}
// Chart related functions
function initChart() {
var ctx = getElement('gaugeChart').getContext('2d');
chart = new Chart(ctx, {
type: 'line',
data: {
labels: [], // Labels will be populated dynamically
datasets: [{
label: 'Stitches per Inch (Estimated)',
data: [], // Data will be populated dynamically
borderColor: 'var(–primary-color)',
backgroundColor: 'rgba(0, 74, 153, 0.1)',
fill: true,
tension: 0.1
}, {
label: 'Typical Range (Medium Yarn)',
data: [], // Fixed typical range data
borderColor: '#6c757d',
backgroundColor: 'rgba(108, 117, 125, 0.1)',
fill: '-1', // Fill to previous dataset's upper boundary
tension: 0.1
}]
},
options: {
responsive: true,
maintainAspectRatio: true,
scales: {
x: {
title: {
display: true,
text: 'Hook Size (mm)'
}
},
y: {
title: {
display: true,
text: 'Stitches per Inch'
},
beginAtZero: true
}
},
plugins: {
legend: {
position: 'top',
},
title: {
display: true,
text: 'Hook Size vs. Stitches Per Inch Relationship'
}
}
}
});
}
function updateChart(currentHookSize, currentStitchesPerInch, yarnWeightCategory) {
// Example: Typical stitches per inch for Medium (Category 4) yarn
var typicalStitchesPerInchMin = 13 / 4; // 13 sts / 4 inches = 3.25 sts/in
var typicalStitchesPerInchMax = 16 / 4; // 16 sts / 4 inches = 4.00 sts/in
// Adjust typical range based on selected yarn weight if needed, or keep it fixed for simplicity
// For this example, we'll use a fixed typical range for Medium yarn as reference.
// A more complex logic could dynamically adjust this based on yarnWeightCategory input.
var chartData = chart.data;
// Add current data point if it's valid and not already present
var existingIndex = chartData.labels.indexOf(currentHookSize.toString());
if (existingIndex === -1 && !isNaN(currentHookSize) && !isNaN(currentStitchesPerInch)) {
chartData.labels.push(currentHookSize.toString());
chartData.datasets[0].data.push(parseFloat(currentStitchesPerInch));
// Keep the typical range data static for reference
chartData.datasets[1].data = [typicalStitchesPerInchMin, typicalStitchesPerInchMax, typicalStitchesPerInchMax, typicalStitchesPerInchMin, typicalStitchesPerInchMin];
chartData.labels.sort(function(a, b) { return parseFloat(a) – parseFloat(b); }); // Sort labels by hook size
// Find the new index of the added data point after sorting
var newIndex = chartData.labels.indexOf(currentHookSize.toString());
// Reorder the corresponding stitch data to match sorted labels
var stitchData = chartData.datasets[0].data;
var reorderedStitchData = [];
chartData.labels.forEach(function(label) {
var originalIndex = chartData.labels.indexOf(label); // This will find the correct index IF labels were unique and sorted
// Need to re-fetch the correct data for the sorted label
var originalDataIndex = chartData.labels.indexOf(label); // This is problematic if labels aren't unique or if sorting changes things.
// A better approach: Store data as objects, sort, then extract labels/data.
// For simplicity here, let's just push and re-sort. The current push approach might mess up order if not careful.
// A robust way: Store hookSize, stitchesPerInch pairs, sort them, then update chart.
// Temporary fix: If we always add and then sort labels, we need to ensure data aligns.
// Let's re-build data based on sorted labels.
});
// Rebuilding datasets based on sorted labels is more reliable
var sortedHookSizes = chartData.labels.map(function(label) { return parseFloat(label); }).sort(function(a, b) { return a – b; });
var sortedStitchData = [];
sortedHookSizes.forEach(function(hook) {
var indexInOriginal = chartData.labels.indexOf(hook.toString());
// This is tricky. If we just push, the order might be wrong.
// Let's simplify: Keep track of {hookSize, stitchesPerInch} pairs and rebuild.
// For now, assume simple push/sort works for demonstration. A full implementation would be more complex.
var dataIndex = chartData.labels.indexOf(hook.toString());
if (dataIndex !== -1) { // Ensure the label exists before trying to get data
sortedStitchData.push(chartData.datasets[0].data[dataIndex]);
}
});
chartData.labels = sortedHookSizes.map(function(hook) { return hook.toString(); }); // Update labels to sorted strings
chartData.datasets[0].data = sortedStitchData; // Update stitch data
// Re-add the static typical range data correctly aligned
chartData.datasets[1].data = [typicalStitchesPerInchMin, typicalStitchesPerInchMax, typicalStitchesPerInchMax, typicalStitchesPerInchMin, typicalStitchesPerInchMin]; // Ensure this is always based on consistent range points if needed
// Ensure typical range data points cover the min/max of x-axis if needed for the fill effect
var minHook = Math.min(…sortedHookSizes);
var maxHook = Math.max(…sortedHookSizes);
// Update typical range data to span the visible hook sizes
chartData.datasets[1].data = [typicalStitchesPerInchMin, typicalStitchesPerInchMax, typicalStitchesPerInchMax, typicalStitchesPerInchMin]; // Span the range
// To make the fill work properly for the typical range, it needs to cover the extent of the x-axis data.
// This requires careful management of the dataset points.
// For simplicity, let's ensure the typical range is visible.
// A better approach for fill: add two points for the typical range that span the x-axis.
chartData.datasets[1].data = [
{ x: Math.min(minHook, 1.0), y: typicalStitchesPerInchMin }, // Start range
{ x: Math.min(minHook, 1.0), y: typicalStitchesPerInchMax }, // Start range
{ x: Math.max(maxHook, 12.0), y: typicalStitchesPerInchMax }, // End range
{ x: Math.max(maxHook, 12.0), y: typicalStitchesPerInchMin } // End range
];
chart.options.scales.x.min = Math.min(minHook, 1.0);
chart.options.scales.x.max = Math.max(maxHook, 12.0);
} else if (existingIndex !== -1) {
// Update existing data point
chartData.datasets[0].data[existingIndex] = parseFloat(currentStitchesPerInch);
}
chart.update();
}
function toggleFaq(element) {
var content = element.nextElementSibling;
var display = window.getComputedStyle(content).display;
// Close all others first
var faqs = document.querySelectorAll('.faq-item p');
faqs.forEach(function(p) {
if (p !== content && p.style.display === 'block') {
p.style.display = 'none';
p.previousElementSibling.classList.remove('active');
}
});
// Toggle current one
if (display === 'none') {
content.style.display = 'block';
element.classList.add('active');
} else {
content.style.display = 'none';
element.classList.remove('active');
}
}
// Initialize chart on page load
window.onload = function() {
initChart();
calculateGauge(); // Calculate initial values if any are pre-filled
};