The primary goal is to calculate the total milligrams of famotidine required based on your cat's weight and the veterinarian's prescribed dosage per kilogram. Then, this total is converted into the specific volume of liquid or number of tablets.
Dosage Recommendation Chart
Famotidine Dosage Guide by Cat Weight
Cat Weight (kg)
Target Dosage (mg/kg)
Total mg Needed
Recommended Volume (mL) @ [CONC] mg/mL
Equivalent Tablets @ [STR] mg/tablet
What is Famotidine for Cats?
Famotidine, commonly known by brand names like Pepcid AC, is a medication primarily used in human medicine to reduce stomach acid production. It belongs to a class of drugs called H2 blockers. In veterinary medicine, particularly for cats, famotidine is prescribed off-label by veterinarians to treat various gastrointestinal issues, including:
Gastric ulcers
Gastroesophageal reflux
Gastritis (inflammation of the stomach lining)
Esophagitis (inflammation of the esophagus)
Certain types of vomiting
It works by blocking histamine (H2 receptors) on the cells in the stomach lining, which signals them to produce less acid. By decreasing stomach acidity, famotidine can help alleviate pain associated with acid-related conditions and allow damaged tissues to heal.
Who should use it: Famotidine should only be administered to cats under the direct guidance and prescription of a qualified veterinarian. Self-diagnosing and treating your cat can be dangerous. Your vet will determine if famotidine is appropriate for your cat's specific condition, weight, and overall health, and will provide the correct dosage instructions.
Common misconceptions:
It's the same as human medication: While the active ingredient is the same, human formulations (like tablets) might contain inactive ingredients that are not safe for cats. Always use veterinary-grade products or formulations specifically recommended by your vet. Crushing human tablets requires careful consideration of fillers.
It's a cure-all for vomiting: Vomiting in cats can have many causes, some serious. Famotidine only addresses issues related to excess stomach acid. It will not help if the cause is kidney disease, dietary indiscretion, parasites, or other non-acid-related problems.
Dosage is universal: Famotidine dosage for cats is highly dependent on their weight and the severity of their condition. Using a generic dosage chart without considering individual factors can lead to under- or over-dosing.
Famotidine Dosage Calculation and Mathematical Explanation
Calculating the correct famotidine dosage for your cat involves several steps to ensure accuracy and safety. The fundamental principle is to match the prescribed dose per unit of body weight to the cat's actual weight, then convert this into a practical volume of liquid or number of tablets.
The Core Calculation Formula
The primary goal is to determine the total amount of famotidine in milligrams (mg) the cat needs, and then translate that into a manageable form (mL of liquid or number of tablets).
Calculating Total Milligrams Needed:
This is the most crucial step, linking the cat's size to the medication's potency. The vet will typically prescribe a dosage in milligrams per kilogram (mg/kg) or milligrams per pound (mg/lb) of body weight.
Total mg Needed = Cat's Weight (in kg) × Target Dosage (in mg/kg)
Calculating Liquid Volume (if using liquid form):
Once you know the total milligrams required, you can determine how much liquid to administer based on its concentration (mg of famotidine per mL of liquid).
If using famotidine tablets (often crushed or compounded), you'll calculate how many whole or partial tablets are needed.
Number of Tablets = Total mg Needed (mg) / Tablet Strength (mg/tablet)
Variable Explanations
Here's a breakdown of the variables used in the famotidine dosage calculation:
Variable
Meaning
Unit
Typical Range / Notes
Cat's Weight
The current body weight of the cat.
kg (or lb)
0.5 kg – 10+ kg (Highly variable)
Target Dosage
The prescribed amount of famotidine per unit of body weight. This is determined by the veterinarian.
mg/kg (or mg/lb)
Commonly 0.25 mg/kg to 1.0 mg/kg, but can vary. Always follow vet's orders.
Total mg Needed
The total calculated quantity of the active drug required for a single dose.
mg
Calculated based on weight and target dosage.
Famotidine Concentration
The amount of famotidine present in each milliliter of the liquid formulation.
mg/mL
Common veterinary liquid concentrations are 10 mg/mL or 20 mg/mL. Human suspensions might differ.
Volume
The amount of liquid medication to administer.
mL
Calculated based on total mg needed and concentration.
Tablet Strength
The amount of famotidine present in a single, whole tablet.
mg/tablet
Common strengths are 10 mg, 20 mg. Human formulations vary (e.g., 20 mg).
Number of Tablets
The quantity of tablets required for the dose.
Tablets
Calculated based on total mg needed and tablet strength. May require splitting or crushing.
Practical Examples of Famotidine Dosage Calculation
Understanding the calculation process is easier with real-world scenarios. These examples illustrate how the famotidine for cats dosage chart by weight calculator helps determine precise dosing.
Example 1: Cat with Gastritis on Liquid Famotidine
Luna is a 4.5 kg domestic shorthair cat diagnosed with mild gastritis. Her veterinarian prescribes famotidine at a dosage of 0.5 mg per kg of body weight, administered orally twice daily. Luna's medication is a veterinary liquid suspension with a concentration of 10 mg/mL.
Inputs:
Cat's Weight: 4.5 kg
Target Dosage: 0.5 mg/kg
Famotidine Concentration: 10 mg/mL
Medication Form: Liquid
Calculations:
Total mg Needed: 4.5 kg × 0.5 mg/kg = 2.25 mg
Volume (mL): 2.25 mg / 10 mg/mL = 0.225 mL
Result: Luna needs 2.25 mg of famotidine per dose. This translates to administering 0.225 mL of the 10 mg/mL liquid suspension twice daily. The calculator would display the primary result as approximately 0.23 mL.
Example 2: Cat with Suspected Ulcer on Tablet Famotidine
Max is a 6.8 kg Maine Coon experiencing signs potentially related to stomach ulcers. The veterinarian recommends a famotidine dose of 0.75 mg/kg, to be given once daily. The only available famotidine is in 20 mg tablets, which the vet advises can be carefully crushed and mixed with a small amount of wet food.
Inputs:
Cat's Weight: 6.8 kg
Target Dosage: 0.75 mg/kg
Tablet Strength: 20 mg/tablet
Medication Form: Tablet
Calculations:
Total mg Needed: 6.8 kg × 0.75 mg/kg = 5.1 mg
Number of Tablets: 5.1 mg / 20 mg/tablet = 0.255 tablets
Result: Max requires 5.1 mg of famotidine per dose. Since the tablets are 20 mg, he needs approximately 0.255 of a tablet. This is a small fraction, often challenging to administer accurately. The vet might suggest an alternative formulation or compounding pharmacy. If precision is critical and compounding isn't feasible, the vet might adjust the dose or recommend a liquid form. The calculator would indicate needing about 0.26 tablets.
How to Use This Famotidine for Cats Dosage Calculator
This famotidine for cats dosage chart by weight calculator is designed for ease of use, helping you quickly determine appropriate dosages under veterinary supervision. Follow these simple steps:
Step 1: Weigh Your Cat Accurately
Use a reliable scale to determine your cat's current weight in kilograms (kg). If you only have pounds, convert it (1 kg ≈ 2.2 lbs). Ensure the weight is up-to-date, as changes can affect dosage.
Step 2: Consult Your Veterinarian
Crucially, this calculator is a tool, not a substitute for professional veterinary advice. Your vet must prescribe the famotidine and provide the specific target dosage (e.g., 0.5 mg/kg). Note the prescribed dosage and the concentration of the medication (liquid) or strength of the tablets you will be using.
Step 3: Input Cat's Weight
Enter your cat's weight in kilograms into the 'Cat's Weight' field.
Step 4: Select Medication Details
Choose the correct 'Famotidine Concentration' from the dropdown if you are using a liquid. If using tablets, select 'Tablet' under 'Medication Form' and enter the 'Tablet Strength' in milligrams (mg).
Step 5: Set Target Dosage
Enter the veterinarian's prescribed target dosage in mg/kg into the 'Target Dosage' field. Ensure this matches your vet's recommendation precisely.
Step 6: View Results
Click the 'Calculate Dosage' button. The calculator will display:
Primary Result: The recommended volume in milliliters (mL) for liquid medication, or the number of tablets needed.
Intermediate Values: Total milligrams required, dosage in mg/kg (to verify input), and volume/tablet count.
Dosage Chart & Table: Visual and tabular representations of dosage guidelines for various weights.
Step 7: Use the 'Copy Results' Button
If you need to share the calculated information with your vet or keep a record, use the 'Copy Results' button. It captures all key outputs for easy sharing.
Decision-Making Guidance: Always double-check the calculated dosage against your vet's prescription. If the calculated volume or number of tablets seems unusual (e.g., extremely small volumes, fractions of a tablet that are hard to measure), contact your vet for clarification or alternative formulations. Accurate dosing is vital for your cat's health and safety.
Key Factors Affecting Famotidine Dosage Results
While the calculator provides a precise mathematical output, several real-world factors can influence the interpretation and application of famotidine dosages for cats. Understanding these nuances is crucial for effective treatment.
Veterinarian's Prescription (The Primary Factor):
This cannot be overstated. The calculator relies on the vet's prescribed target dosage (mg/kg). Factors like the specific condition being treated (ulcers vs. reflux), severity, and the cat's overall health status guide the vet's recommendation. Always adhere strictly to their orders.
Cat's Current Weight and Condition:
A cat's weight can fluctuate. If your cat is significantly overweight or underweight, or if their condition changes, the dosage may need adjustment. Obesity can sometimes require dose adjustments due to altered drug distribution, though mg/kg dosing generally accounts for this. Conversely, rapid weight loss might necessitate a recalculation.
Medication Formulation and Concentration:
The accuracy of the liquid's concentration (mg/mL) or tablet's strength (mg/tablet) is vital. Generic or improperly stored medications may have lower potency than stated. Using veterinary-compounded medications often ensures greater accuracy and safety compared to crushing human tablets, which can have variable results due to fillers and binders.
Administration Method (Liquid vs. Tablet):
Administering liquid requires measuring precise volumes, often using specialized syringes. Crushing tablets and mixing them with food introduces variability – ensuring the cat consumes the entire dose is challenging. The calculator helps determine the equivalent, but the practical administration method impacts the actual dose received.
Frequency of Administration:
Vets prescribe dosages based on frequency (e.g., once daily, twice daily). The calculated amount is for *each dose*. Ensure you are administering the correct volume or tablet amount at the prescribed intervals. Missing doses or doubling up can be detrimental.
Kidney and Liver Function:
Famotidine is primarily metabolized by the liver and excreted by the kidneys. Cats with compromised kidney or liver function may require dose adjustments or more frequent monitoring to prevent drug accumulation and potential toxicity. Always inform your vet of any pre-existing conditions.
Interactions with Other Medications:
Famotidine can potentially interact with other drugs. For example, it can affect the absorption of medications that require an acidic environment in the stomach. Discuss all medications and supplements your cat is taking with your veterinarian.
Individual Cat Metabolism:
Like humans, cats metabolize drugs differently. Some may respond more strongly or weakly to a standard dose. Close observation of your cat's response to treatment is essential, and your vet may adjust the dosage based on observed efficacy and side effects.
Frequently Asked Questions (FAQ) about Famotidine for Cats
Q: Can I give my cat human famotidine (Pepcid AC)?
A: It is strongly recommended to use famotidine prescribed by your veterinarian. Human formulations may contain inactive ingredients (like xylitol or excessive binders) that can be harmful or even toxic to cats. If your vet approves a human tablet, they will provide specific instructions on dosage and preparation (e.g., crushing).
Q: What is a safe starting dosage of famotidine for a cat?
A: A common starting point prescribed by veterinarians is typically around 0.5 mg per kg of body weight, administered once or twice daily. However, this is a generalization. The exact dosage is determined by your veterinarian based on the cat's specific condition and weight. Never self-prescribe.
Q: How long does it take for famotidine to work in cats?
A: Famotidine begins reducing stomach acid relatively quickly, often within an hour or two of administration. However, the noticeable improvement in symptoms like vomiting or discomfort may take several hours to a couple of days, depending on the severity of the underlying condition and how consistently the medication is given.
Q: What are the side effects of famotidine in cats?
A: When used at prescribed doses, famotidine is generally considered safe for cats. Potential side effects are relatively uncommon but can include drowsiness, lethargy, decreased appetite, or vomiting. Rarely, more serious reactions can occur. Contact your vet immediately if you notice any concerning changes in your cat's behavior or health.
Q: My cat weighs 5 kg. What is the dosage?
A: This calculator requires the prescribed target dosage (mg/kg) from your veterinarian. For example, if your vet prescribed 0.5 mg/kg, then for a 5 kg cat, the calculation would be: 5 kg * 0.5 mg/kg = 2.5 mg total needed. You would then use the calculator to convert this 2.5 mg into mL (based on concentration) or tablets (based on strength). Always confirm with your vet.
Q: Can I measure liquid famotidine with a regular spoon?
A: No, never use household spoons for measuring medication. They are highly inaccurate. Always use the calibrated oral syringe or dosing device that comes with the medication or is recommended by your veterinarian to ensure precise measurement of milliliters (mL).
Q: What if my cat refuses to take the medication?
A: Hiding crushed tablets or liquid in a small amount of palatable wet food, a veterinary-approved treat (like a lickable treat), or using a pill-giver/liquid syringe are common methods. Discuss administration challenges with your vet; they may have alternative suggestions or formulations.
Q: Is this calculator a substitute for a vet visit?
A: Absolutely not. This famotidine for cats dosage chart by weight calculator is a supplementary tool designed to help owners administer a prescribed medication accurately. It cannot diagnose conditions, determine the appropriate drug, or replace the critical judgment and oversight of a licensed veterinarian. Always consult your vet for any health concerns regarding your cat.
Q: Can famotidine be used for diarrhea in cats?
A: Famotidine is primarily used to reduce stomach acid and treat conditions like ulcers and gastritis. It is not a primary treatment for diarrhea. Diarrhea in cats can stem from numerous causes, and famotidine will likely not address the root issue. Consult your veterinarian for an accurate diagnosis and appropriate treatment plan for diarrhea.
Related Tools and Internal Resources
Explore these helpful resources to manage your cat's health effectively:
Cat Health Tracker: Log symptoms, medications, and vet visits to monitor your cat's well-being over time.
Feline Nutrition Guide: Understand the best dietary practices for your cat's health, which can impact gastrointestinal issues.
Cat Weight Management Calculator: Ensure your cat is at a healthy weight, as this is crucial for accurate medication dosing and overall health.
Pet Insurance Options: Explore how pet insurance can help manage the costs associated with veterinary care for conditions requiring medication like famotidine.
var chart = null;
var chartData = {
weights: [],
dosagesMg: [],
volumesMl: []
};
var chartContext = null;
function getElement(id) {
return document.getElementById(id);
}
function toggleFaq(element) {
var answer = element.nextElementSibling;
if (answer.style.display === "block") {
answer.style.display = "none";
} else {
answer.style.display = "block";
}
}
function validateInput(value, min, max, errorElementId, fieldName, unit = ") {
var errorElement = getElement(errorElementId);
errorElement.innerText = ";
errorElement.classList.remove('visible');
if (value === null || value === ") {
errorElement.innerText = fieldName + ' cannot be empty.';
errorElement.classList.add('visible');
return false;
}
var numberValue = parseFloat(value);
if (isNaN(numberValue)) {
errorElement.innerText = fieldName + ' must be a valid number.';
errorElement.classList.add('visible');
return false;
}
if (numberValue max) {
errorElement.innerText = fieldName + ' cannot be greater than ' + max + unit + '.';
errorElement.classList.add('visible');
return false;
}
return true;
}
function calculateDosage() {
var catWeight = getElement("catWeight").value;
var concentration = getElement("concentration").value;
var dosageUnit = getElement("dosageUnit").value;
var medicationForm = getElement("medicationForm").value;
var tabletStrengthMg = getElement("tabletStrengthMg").value;
var liquidDosageMgPerKg = getElement("liquidDosageMgPerKg").value;
var errors = false;
if (!validateInput(catWeight, 0.1, null, "catWeightError", "Cat's Weight", " kg")) errors = true;
if (medicationForm === 'tablet' && !validateInput(tabletStrengthMg, 1, null, "tabletStrengthMgError", "Tablet Strength", " mg")) errors = true;
if (!validateInput(liquidDosageMgPerKg, 0.01, null, "liquidDosageMgPerKgError", "Target Dosage", " mg/kg")) errors = true;
if (errors) {
getElement("result").innerHTML = 'Please correct the errors.';
getElement("result").style.backgroundColor = 'var(–error-color)';
return;
}
var weightKg = parseFloat(catWeight);
var concentrationMgMl = parseFloat(concentration);
var targetDosageMgPerKg = parseFloat(liquidDosageMgPerKg);
var tabletStrength = medicationForm === 'tablet' ? parseFloat(tabletStrengthMg) : 0;
var totalMgNeeded = weightKg * targetDosageMgPerKg;
var volumeMl = 0;
var numTablets = 0;
if (medicationForm === 'liquid') {
volumeMl = totalMgNeeded / concentrationMgMl;
numTablets = 0; // Not applicable for liquid
} else { // tablet form
volumeMl = 0; // Not applicable for tablets
numTablets = totalMgNeeded / tabletStrength;
}
// Rounding for display
var displayMgPerKg = targetDosageMgPerKg.toFixed(2);
var displayTotalMg = totalMgNeeded.toFixed(2);
var displayVolumeMl = volumeMl.toFixed(3); // More precision for volume
var displayNumTablets = numTablets.toFixed(3); // More precision for tablets
// Update primary result
var primaryResultText = "";
var secondaryResultText = "";
if (medicationForm === 'liquid') {
primaryResultText = parseFloat(displayVolumeMl) + " mL";
secondaryResultText = "(" + parseFloat(displayTotalMg) + " mg)";
getElement("volumeResult").style.display = 'block';
getElement("tabletCountResult").style.display = 'none';
getElement("volumeResult").querySelector('strong').innerText = parseFloat(displayVolumeMl);
getElement("volumeResult").querySelector('small').innerText = 'mL (liquid)';
} else {
primaryResultText = parseFloat(displayNumTablets) + " Tablets";
secondaryResultText = "(" + parseFloat(displayTotalMg) + " mg)";
getElement("tabletCountResult").style.display = 'block';
getElement("volumeResult").style.display = 'none';
getElement("tabletCountResult").querySelector('strong').innerText = parseFloat(displayNumTablets);
getElement("tabletCountResult").querySelector('small').innerText = 'Tablets';
}
getElement("result").innerHTML = primaryResultText + " " + secondaryResultText + "";
getElement("result").style.backgroundColor = 'var(–success-color)';
// Update intermediate results
getElement("mgPerKgResult").querySelector('strong').innerText = displayMgPerKg;
getElement("mgPerKgResult").querySelector('small').innerText = 'mg/kg (Target)';
getElement("totalMgResult").querySelector('strong').innerText = displayTotalMg;
getElement("totalMgResult").querySelector('small').innerText = 'Total mg needed';
// Update table and chart data
updateTableAndChart(weightKg, targetDosageMgPerKg, concentrationMgMl, tabletStrength, medicationForm);
}
function updateTableAndChart(currentWeight, currentTargetDosage, currentConcentration, currentTabletStrength, currentMedForm) {
var tableBody = getElement("dosageTableBody");
tableBody.innerHTML = "; // Clear existing rows
chartData.weights = [];
chartData.dosagesMg = [];
chartData.volumesMl = [];
var weightsToChart = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]; // Example weights for the chart and table
var concentrationDisplay = currentConcentration;
var tabletStrengthDisplay = currentTabletStrength;
if (currentMedForm === 'liquid') {
getElement("dosageTable").rows[0].cells[3].innerHTML = "Recommended Volume (mL) @ " + concentrationDisplay + " mg/mL";
getElement("dosageTable").rows[0].cells[4].innerHTML = "N/A"; // Hide tablet column if liquid
getElement("dosageTable").rows[0].cells[4].style.display = 'none';
} else {
getElement("dosageTable").rows[0].cells[3].innerHTML = "N/A"; // Hide volume column if tablet
getElement("dosageTable").rows[0].cells[3].style.display = 'none';
getElement("dosageTable").rows[0].cells[4].innerHTML = "Equivalent Tablets @ " + tabletStrengthDisplay + " mg/tablet";
getElement("dosageTable").rows[0].cells[4].style.display = 'table-cell';
}
for (var i = 0; i < weightsToChart.length; i++) {
var weight = weightsToChart[i];
var totalMg = weight * currentTargetDosage;
var volume = 0;
var tablets = 0;
var row = tableBody.insertRow();
var cellWeight = row.insertCell(0);
var cellTargetDosage = row.insertCell(1);
var cellTotalMg = row.insertCell(2);
var cellVolume = row.insertCell(3);
var cellTablets = row.insertCell(4);
cellWeight.innerText = weight.toFixed(1) + " kg";
cellTargetDosage.innerText = currentTargetDosage.toFixed(2) + " mg/kg";
cellTotalMg.innerText = totalMg.toFixed(2) + " mg";
if (currentMedForm === 'liquid') {
volume = totalMg / currentConcentration;
cellVolume.innerText = volume.toFixed(3) + " mL";
cellTablets.innerText = "N/A";
cellTablets.style.display = 'none';
cellVolume.style.display = 'table-cell';
} else { // tablet form
tablets = totalMg / currentTabletStrength;
cellVolume.innerText = "N/A";
cellVolume.style.display = 'none';
cellTablets.innerText = tablets.toFixed(3);
cellTablets.style.display = 'table-cell';
}
chartData.weights.push(weight);
chartData.dosagesMg.push(totalMg);
if (currentMedForm === 'liquid') {
chartData.volumesMl.push(volume);
} else {
chartData.volumesMl.push(tablets); // Use tablets for the second series if form is tablet
}
}
updateChart(currentMedForm);
}
function updateChart(medForm) {
if (chart) {
chart.destroy();
}
chartContext = getElement("dosageChart").getContext("2d");
var labelY1 = medForm === 'liquid' ? 'Volume (mL)' : 'Tablets';
var labelY2 = 'Total mg Needed';
var datasets = [
{
label: labelY1,
data: chartData.volumesMl,
borderColor: 'rgb(75, 192, 192)',
tension: 0.1,
fill: false,
yAxisID: 'y-axis-1'
},
{
label: labelY2,
data: chartData.dosagesMg,
borderColor: 'rgb(255, 99, 132)',
tension: 0.1,
fill: false,
yAxisID: 'y-axis-2'
}
];
chart = new Chart(chartContext, {
type: 'line',
data: {
labels: chartData.weights.map(function(w) { return w + ' kg'; }),
datasets: datasets
},
options: {
responsive: true,
maintainAspectRatio: true,
scales: {
x: {
title: {
display: true,
text: 'Cat Weight (kg)'
}
},
'y-axis-1': {
type: 'linear',
position: 'left',
title: {
display: true,
text: labelY1
},
ticks: {
beginAtZero: true
}
},
'y-axis-2': {
type: 'linear',
position: 'right',
title: {
display: true,
text: labelY2
},
ticks: {
beginAtZero: true
},
grid: {
drawOnChartArea: false, // only want the grid lines for one axis to show up
}
}
},
plugins: {
title: {
display: true,
text: 'Famotidine Dosage vs. Cat Weight'
},
legend: {
position: 'top',
}
}
}
});
}
function handleMedicationFormChange() {
var medicationForm = getElement("medicationForm").value;
if (medicationForm === 'tablet') {
getElement("tabletDosageGroup").style.display = 'block';
getElement("liquidDosageGroup").style.display = 'none';
getElement("concentration").closest('.input-group').style.display = 'none';
} else {
getElement("tabletDosageGroup").style.display = 'none';
getElement("liquidDosageGroup").style.display = 'block';
getElement("concentration").closest('.input-group').style.display = 'block';
}
// Recalculate immediately after form change if values exist
if (getElement("catWeight").value && getElement("liquidDosageMgPerKg").value) {
calculateDosage();
}
}
function resetForm() {
getElement("catWeight").value = "5";
getElement("concentration").value = "10";
getElement("dosageUnit").value = "mgPerKg";
getElement("medicationForm").value = "liquid";
getElement("tabletStrengthMg").value = "10";
getElement("liquidDosageMgPerKg").value = "0.5";
getElement("catWeightError").innerText = '';
getElement("catWeightError").classList.remove('visible');
getElement("tabletStrengthMgError").innerText = '';
getElement("tabletStrengthMgError").classList.remove('visible');
getElement("liquidDosageMgPerKgError").innerText = '';
getElement("liquidDosageMgPerKgError").classList.remove('visible');
handleMedicationFormChange(); // Update visibility of relevant fields
calculateDosage(); // Recalculate with default values
}
function copyResults() {
var resultDiv = getElement("result");
var intermediateResults = getElement(".intermediate-results").children;
var formulaP = getElement(".formula-explanation p");
var contentToCopy = "— Famotidine Dosage Calculation Results —\n\n";
contentToCopy += "Primary Result:\n" + resultDiv.innerText.replace(" mL", " mL (liquid)").replace(" Tablets", " Tablets") + "\n\n";
contentToCopy += "Key Details:\n";
contentToCopy += "- Cat's Weight: " + getElement("catWeight").value + " kg\n";
contentToCopy += "- Target Dosage: " + getElement("liquidDosageMgPerKg").value + " mg/kg\n";
if (getElement("medicationForm").value === 'liquid') {
contentToCopy += "- Concentration: " + getElement("concentration").value + " mg/mL\n";
} else {
contentToCopy += "- Tablet Strength: " + getElement("tabletStrengthMg").value + " mg/tablet\n";
}
contentToCopy += "- Medication Form: " + getElement("medicationForm").options[getElement("medicationForm").selectedIndex].text + "\n\n";
contentToCopy += "Intermediate Values:\n";
for (var i = 0; i < intermediateResults.length; i++) {
var item = intermediateResults[i];
contentToCopy += "- " + item.querySelector('small').innerText + ": " + item.querySelector('strong').innerText + "\n";
}
contentToCopy += "\nFormula:\n" + formulaP.innerText.replace("Formula Used:", "");
var textArea = document.createElement("textarea");
textArea.value = contentToCopy;
textArea.style.position = "fixed";
textArea.style.left = "-9999px";
document.body.appendChild(textArea);
textArea.focus();
textArea.select();
try {
var successful = document.execCommand('copy');
var msg = successful ? 'Results copied to clipboard!' : 'Failed to copy results.';
console.log(msg);
// Optionally, show a temporary success message to the user
var tempAlert = document.createElement('div');
tempAlert.textContent = msg;
tempAlert.style.cssText = 'position:fixed;top:50%;left:50%;transform:translate(-50%,-50%);background:var(–primary-color);color:white;padding:15px;border-radius:5px;z-index:10000;';
document.body.appendChild(tempAlert);
setTimeout(function(){ document.body.removeChild(tempAlert); }, 2000);
} catch (err) {
console.error('Fallback: Unable to copy', err);
}
document.body.removeChild(textArea);
}
// Initial setup
window.onload = function() {
// Add event listener for medication form change
getElement("medicationForm").addEventListener("change", handleMedicationFormChange);
handleMedicationFormChange(); // Set initial visibility
calculateDosage(); // Calculate initial values
updateTableAndChart(
parseFloat(getElement("catWeight").value),
parseFloat(getElement("liquidDosageMgPerKg").value),
parseFloat(getElement("concentration").value),
parseFloat(getElement("tabletStrengthMg").value),
getElement("medicationForm").value
);
};
// Chart.js library (must be included in your HTML or loaded externally)
// For this self-contained example, we'll assume Chart.js is available.
// In a real WordPress environment, you'd enqueue this script.
// For local testing: include in
// Placeholder for Chart.js – ensure it's loaded before this script runs
// If running standalone, you need to add:
//
// in the section of your HTML.